SeeFactor CT3

FDA 510(k) cleared for human use

Human Medical Imaging Reimagined

  • Multi-Modality in a single, lightweight platform 

  • High-Definition Volumetric Imaging CT

  • Move ultra-high resolution imaging to the patient in ICU, ER/Trauma, OR & Imaging Room 

Image Gallery

Human Imaging Reimagined

SeeFactor CT3


SeeFactor CT3 has the highest spatial resolution and lowest noise of any clinical 3D imaging system. Contrast resolution rivals any conventional CT.


Unlike conventional CT systems,  SeeFactor CT3 provides non-interpolated (gapless, 100% real) image data delivering extraordinary isotropic image resolution as fine as 0.1mm in soft and hard tissue, lesion detection as small as 0.2mm and “pulsed technology” to significantly reduce the radiation dose received by the patient and surrounding healthcare delivery team.  


View images in axial, sagittal, and coronal planes - because of this, SeeFactor CT3 studies can be easier to read than radiographs.

  • Volumetric with no interpolation

  • Diagnostically superior to conventional CT

  • Study set up in minutes

  • Highest spatial resolution

  • Lower radiation dose

  • Portable (easily moved through standard sized doors/hallways)

  • Functional Imaging protocols

  • Fluoroscopy on-board

  • Diagnostic (soft and hard tissue), Interventional & Intraoperative

  • Less costly to buy, install and maintain

  • Integrates with other technologies

  • Ergonomic and easy to use


HDVI (High Definition Volumetric Imaging) is a new hybrid technology in CT (Computed Tomography)

that provides unprecedented diagnostic and interventional information for clinicians.

How is Epica's HDVI Technology Different from Conventional CT?

Conventional CT samples densities within a patient’s anatomy, providing axial sliced data, leaving gaps in the data in-between each slice. The data is reconstructed using interpolation, which works by using known data to estimate values at unknown points. After the data had been interpolated it is rendered in axial and coronal data sets. The resolution is different on each side. 

HDVI technology scans a solid volume of data at a time, resulting in gapless data, with no need

for interpolation. HDVI delivers a 3D map of densities with spacial resolution that is the same in

all three dimensions, with contrast equivalent to conventional CT. 


This volume of data can provide resolution as small as 0.09mm which is about the thickness of a human hair. Clinicians can see the data in any angle, thickness or orientation leading to superior diagnostic confidence.


This is why Epica HDVI is the new standard for primary imaging.


SeeFactor CT3 HDVI Multi-Modality,

Mobile Imaging Platform

Full Featured Fluoroscopy

High-resolution images, auto brightness/contrast and frame rates from 1-30 fps. 


Any orientation of the patient may be viewed and the gantry can move over the patient during a study.

Platform Features Include:


  • Road Mapping

  • Digital Subtraction Angiography

  • Burst Mode

  • Dose Reduction Technology

  • Auto-Collimation

  • Tip Tracking

Digital Radiography

Flat filled radiographs of the study region of interest can be taken instantly


Patient Sizes: Any Size: Head, Neck, Extremities. Small Patients: Thorax, Abdomen

Bore Diameter: 60cm

Imaging Area (Workspace): Pre-Bore Scanning - Open Workspace

HDVI Field of View: 18cm or 35cm Diameter x  up to 32cm length

HDVI Spatial Resolutions: 100 -600 micron in all 3 dimensions

Scan Speed: 4-24 Seconds per Stack

Study Set-up Time: <2 min

Power Required: 220V, 20 amp, Single Phase

Mobile: Yes 

Weight: 770#

X,Y,Z Axis Resolution Outputs: 0.1, 0.15, 0.2, 0.25, 0.3,0.4, 0.5, 0.6 mm

Isotropic Voxels: Always

Interpolation of Data Gaps: NA: Gapless Data

Volumetric Data: Yes 

Fluoroscopy: Yes 

Interventional Fluoro Functions: DSA, Roadmapping, Auro  Collumation, Tip Tracking, Dose Reduction, Burst Mode, 1-30 fps

Digital Radiography: Yes

Micro-Rad Low Radiation Technology: Yes 

Diagnostic Utility: Yes 

Interventional Utility: Yes 

Intraoperative: Yes

* Shielding requirements may vary from state to state.

Please check your state's regulations to ensure compliance. 

Fluoroscopy includes: 
Road Mapping
Digital Subtraction
Burst Mode

Radiation Reduction Technology


Tip Tracking

Pricing: Contact Epica

See Factor CT3

Product Sheet



Discover More Contact Us


Educational Resources

Scientific Reports | Case Studies | Videos | And More

In our resource center, you will find an abundance of resources on a variety of topics from imaging to marketing support. Take a look now!

Corporate Headquarters

Phone Number: (949) 238-6323

Address: 901 Calle Amanecer, Suite 150
San Clemente, CA  92673


  • Black YouTube Icon
  • Black LinkedIn Icon

©2019 by Epica International, Inc.